ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF )

Full Version: 18dBi 23cm / 27dBi 3.4GHz Gridpack Antennas (+ spare feeders)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
For anyone interested in High Gain antennas for 23cm or 3.4GHz, see below antenna specs recently getting around VK3 folk with great results.

18dBi 23cm/1.2GHz/1.3GHz Gridpack Antenna
23cm/1296MHz/1.3GHz Antenna
Freq Range: 1.24-1.3GHz
Bandwidth 60Mhz
Gain: 18dBi
VerBeamwidth: 18
HorBeamwidth: 28
F/B Ratio: >25dB
VSWR: <1.5
Impedence: 50 Ohm
Polarization: Vertical or Horizontal
Max Power: 100W
Connector: N-Female
Dimensions: W600xH900mm (Horizontal Polarity orientation)
Weight: 4.5Kg
Rated Wind Velocity: 60m/s
Mast Diameter: 40-50mm
Manufactured: 2021
Spare feeders available if you already have a reflector.



27dBi 3.4GHz Antenna
Freq Range: 3.3-3.8GHz
Bandwidth 500Mhz
Gain: 27dBi
Beamwidth: E9.5 H6.5
F/B Ratio: 30dB
VSWR: <1.5
Impedence: 50 Ohm
Polarization: Vertical or Horizontal
Max Power: 100W
Connector: N-Female
Dimensions:W 600xH900mm (Horizontal Polarity orientation)
Weight: 3.6Kg
Mast Diameter: 40-50mm
Manufactured: 2021

400x600mm 3.4GHz version also available (cheaper)
Spare feeders available if you already have a reflector.


Anyone interested can contact me directly (email address available on QRZ)