ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF )

Full Version: Valve Amp - Safe Power For RTTY?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi to All,

As some may be aware, I have a ACOM-1500.

What would be a safe bet for maximum power to be used on modes like RTTY?

Regards

Pete
Pete if you have a look at the manual page 29 has the answer to your question. 

Roger ZL3RC
(14-12-2023, 06:20 PM)ZL3RC Wrote: [ -> ]Pete if you have a look at the manual page 29 has the answer to your question. 

Roger ZL3RC

Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV
(14-12-2023, 06:54 PM)VK4CCV Wrote: [ -> ]You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV

Try this link..

https://www.acom-bg.com/sites/default/fi...8_2021.pdf
(14-12-2023, 06:54 PM)VK4CCV Wrote: [ -> ]Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV



(14-12-2023, 06:54 PM)VK4CCV Wrote: [ -> ]Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV


(14-12-2023, 06:54 PM)VK4CCV Wrote: [ -> ]Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV