+- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum)
+-- Forum: BAND BY BAND (https://www.ahrdf.net/forum/forum-28.html)
+--- Forum: 1296MHz, Microwave & Opto (https://www.ahrdf.net/forum/forum-7.html)
+--- Thread: 18dBi 23cm / 27dBi 3.4GHz Gridpack Antennas (+ spare feeders) (/thread-1061.html)
18dBi 23cm / 27dBi 3.4GHz Gridpack Antennas (+ spare feeders) - VK3TWO - 22-07-2021
For anyone interested in High Gain antennas for 23cm or 3.4GHz, see below antenna specs recently getting around VK3 folk with great results.
18dBi 23cm/1.2GHz/1.3GHz Gridpack Antenna
23cm/1296MHz/1.3GHz Antenna
Freq Range: 1.24-1.3GHz
Bandwidth 60Mhz
Gain: 18dBi
VerBeamwidth: 18
HorBeamwidth: 28
F/B Ratio: >25dB
VSWR: <1.5
Impedence: 50 Ohm
Polarization: Vertical or Horizontal
Max Power: 100W
Connector: N-Female
Dimensions: W600xH900mm (Horizontal Polarity orientation)
Weight: 4.5Kg
Rated Wind Velocity: 60m/s
Mast Diameter: 40-50mm
Manufactured: 2021
Spare feeders available if you already have a reflector.
27dBi 3.4GHz Antenna
Freq Range: 3.3-3.8GHz
Bandwidth 500Mhz
Gain: 27dBi
Beamwidth: E9.5 H6.5
F/B Ratio: 30dB
VSWR: <1.5
Impedence: 50 Ohm
Polarization: Vertical or Horizontal
Max Power: 100W
Connector: N-Female
Dimensions:W 600xH900mm (Horizontal Polarity orientation)
Weight: 3.6Kg
Mast Diameter: 40-50mm
Manufactured: 2021
400x600mm 3.4GHz version also available (cheaper)
Spare feeders available if you already have a reflector.
Anyone interested can contact me directly (email address available on QRZ)