ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF )
VK2RSY 23CM Beacon - Printable Version

+- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum)
+-- Forum: BAND BY BAND (https://www.ahrdf.net/forum/forum-28.html)
+--- Forum: 1296MHz, Microwave & Opto (https://www.ahrdf.net/forum/forum-7.html)
+--- Thread: VK2RSY 23CM Beacon (/thread-1230.html)



VK2RSY 23CM Beacon - VK2BLS - 28-09-2022

VK2RSY 23CM beacon has been off air for over 2 years now.

Does anyone have info about its current situation or return?


RE: VK2RSY 23CM Beacon - VK2ZRH/4 - 29-09-2022

Try enquiring with Mark Blackmore VK2XOF, m-dot-blackmore_at_optusnet-dot-com-dot-au


RE: VK2RSY 23CM Beacon - VK2JDS - 10-07-2023

(28-09-2022, 09:48 PM)VK2BLS Wrote: VK2RSY 23CM beacon has been off air for over 2 years now.

Does anyone have info about its current situation or return?

I have emailed Mark a few times. no replies, all thats required is a small vertical on the shed roof, at least its something.
thats too hard apparently.
we just have to keep waiting, i have a second large dish by the house thats been up and working for a few years, but without a beacon to aim with its not really useable for 23 on 23, its too sharp without an aiming point (3 degree lobe) 
73 Dave vk2jds


RE: VK2RSY 23CM Beacon - VK2ZIW - 11-07-2023

Maddens 23cm parrot repeater idents a long ident quite often. Is that useful?

As you know, I'm at Emu Heights some 70Km away, 40m ASL and hear it with my IC-120
and a corner reflector. I can trigger it most tomes, so ask by phone if you need it triggered.

0x73 Alan VK2ZIW