ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF )
23 on 23 for Sydney area - Printable Version

+- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum)
+-- Forum: BAND BY BAND (https://www.ahrdf.net/forum/forum-28.html)
+--- Forum: 1296MHz, Microwave & Opto (https://www.ahrdf.net/forum/forum-7.html)
+--- Thread: 23 on 23 for Sydney area (/thread-125.html)

Pages: 1 2

23 on 23 for Sydney area - VK2FLR - 26-02-2017

Judging by the success of the VK4 23 on 23 activity, are there any takers for a similar effort in the moribund Sydney area? I am willing to kick off on the 23 April at 8pm looking north and then 8:30pm looking south on 1296.100 with my 300w to a 42 el yagi in QF56od.

Re: 23 on 23 for Sydney area - VK2HRX - 26-02-2017

I can give it a go. I'm in QF56ne so should be able to get you with a 910H into a 55 element loop yagi.

Compton
VK2HRX

Re: 23 on 23 for Sydney area - VK2FLR - 27-02-2017

Thanks Compton.

I look forward to making the QSO.

Mr Harrison has pointed out that the next 23rd will be in March, so let's start then.

So 23 on 23 for the Sydney area will start 23rd March 8:00pm to 9:00pm. 8:00-8:30pm looking north and 8:30 to 9:00pm looking south.

I am sure we can rope in a few more.

73

VK2FLR

Re: 23 on 23 for Sydney area - VK2ZIW - 28-02-2017

Hi,
My 12el array with bat-catcher, horizontal, aimed east, fixed in Emu Heights and my IC-910H can also
participate during daytime when my XYL is at work. Much harder at 8pm.
QF56hg
(Dural beacon is Strong here)

Alan VK2ZIW

Re: 23 on 23 for Sydney area - VK2JDS - 04-03-2017

I get the dural beacon reliably from out here at qf46, so perhaps you could aim west for a while during the operational time.
73 Dave

Re: 23 on 23 for Sydney area - VK2FLR - 19-03-2017

A reminder that we are trying a 23 on 23 for the Sydney area next Tuesday March 23 on 1296.100 from 2000.

Added in 44 seconds:
A reminder that we are trying a 23 on 23 for the Sydney area next Tuesday March 23 on 1296.100 from 2000.

Re: 23 on 23 for Sydney area - VK2ZIW - 23-03-2017

10 mins late, but I'm here.
1) Is the Dural beacon on right now?
It was on on Saturday, but not Sunday to now, is this correct?

Alan

Re: 23 on 23 for Sydney area - VK2ZIW - 24-03-2017

We had a successful night.
About five stations:
VK2ZIW, VK2MER, VK2KYP and others..

Well done. Alan VK2ZIW

Re: 23 on 23 for Sydney area - VK4CZ - 26-03-2017

Please also remember to reach out to Darrell VK2BLS next time. He's on 23cm and would be keen to be involved.

Re: 23 on 23 for Sydney area - VK2JDS - 26-03-2017

i had a bad lightning storm here so was not keen to go up to the mountain and set up the gear in the dark when its raining.
however, i can be available if anyone wants a test on 23cm, just call 0429 109 622, or sms, or email <!-- e --><a href="mailto:vk2jds@hotmail.com">vk2jds@hotmail.com</a><!-- e --> and i will go and set up.
73 Dave from out in the central west

Re: 23 on 23 for Sydney area - VK2FLR - 06-04-2017

Next 23 on 23 is Sunday 23 April.

Consistent with the VK4s we will run it in the afternoon according to the VK4 schedule:

2:00pm (04:00z) - 03:00pm (05:00z) 23cm SSB/CW only
3:00pm (05:00z) - 5:00pm (07:00z) 13cm and other uWave bands

For all participants -
VKLogger iChat '23&Above'

So from 2pm I will be looking for contacts on 1296.100 in the Sydney region.

73 VK2FLR

Re: 23 on 23 for Sydney area - VK2ZIW - 24-04-2017

Garry VK2KYP went portable near Gosford.

I put my 12el phased array on my rotated pole, on the shed
at about 12m above the rooftops below me so just 40m ASL

Nogo to Gary. He and I were the only ones on.

Both of us hear the Dural beacon, thus systems work.

Alan VK2ZIW

Re: 23 on 23 for Sydney area - VK2HRX - 24-04-2017

My rotatable yagi is now back up and rotator calibrated. Just need to fix 1 feed line connector and I'm good to go. Should be there next month, May.
Compton
VK2HRX
QF56ne
Ryde, Sydney

Re: 23 on 23 for Sydney area - VK2KYP - 10-05-2017

Just put up a 600 x 900 mm grid pack with 23 cm feed .

Here on the Central Coast the Dural beacon is S1, also working on a power amplifier, hopefully this will be ready for the next 23 on 23.

regards Gary

Re: 23 on 23 for Sydney area - VK2FLR - 19-05-2017

Here we go again.

Next Tuesday 23 May I will be on 1296.100Mhz looking and calling north from QF56od from 8:00 to 8:30pm and then south from 8:30 to 9:00pm.

Hope to see a few on!

VK2FLR
300w to 42 el yagi

Re: 23 on 23 for Sydney area - VK2HRX - 22-05-2017

OK. My rotator is working sort of and its got a 55 elemet loop yagi on it. 10W out of a 910H. I'll point your way from Ryde tomorrow and see what happens.

I can hear the Dural beacon S3.

Compton
QF56ne.

Re: 23 on 23 for Sydney area - VK2HRX - 24-05-2017

Seemed to work OK. Just need a few more on air next month.

Compton
Vk2HRX
QF56ne, Ryde

RE: 23 on 23 for Sydney area - VK2ZIW - 23-06-2017

Tiz 23rd of June, I'm on, 1296.1 SSM with rotatable 12el phased array here in Emu Heights.
We have
VK2BXT Picton way 5&5 to me
VK2IUW Hil, Glenmore Pka strong (close)
VK2YAC Alf, St Marys (strong, close)
VK2MER Kirk, Sutherland 5&1
VK2KYP Gary, West Gosford no-go, barely there on 70cm.
A Chatswood stn.

RE: 23 on 23 for Sydney area - VK2AZ - 23-06-2017

Great fun for my first time on 23cm. Microwave Modules Transverter - 1w - 23 ele loop yagi. QF56IF31
Worked:
Alan VK2ZIW
Kerry VK2BXT
Alf VK2YAC

Heard:
VK2MER

Catch you all during the weekend VHF/UHF WIA Winter Field day contest.

Hil
VK2IUW

RE: 23 on 23 for Sydney area - VK2AZ - 23-07-2017

The next 23 on 23 is today!

Will you be there?