+- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum)
+-- Forum: GENERAL (https://www.ahrdf.net/forum/forum-29.html)
+--- Forum: Transceivers, Transmitters & Receivers (https://www.ahrdf.net/forum/forum-18.html)
+--- Thread: TYT MD UV 390 USB DRIVER (/thread-1345.html)
TYT MD UV 390 USB DRIVER - VK6NIR - 21-10-2023
Hi All,
I am posting this in hope it may help someone with same issue.Recently bought a TYT MD UV 390 off ebay, and the usb driver absolutely did not install in windows 10 pc.Could not connect to radio and could not programm. Search web to learn a specific STM Device in DFU mode driver is required.
One another forum dfudriver gave a link https://www.opengd77.com/viewtopic.php?f=19&t=3344
I downloaded and installed and immediately able to connect.I device manager you can clearly see dfu driver in the very bottom-along with usb drivers.
Hope this helps some one else.I have a copy in case some one needs it.
