Australian Ham Radio Discussion Forum ( AHRDF )
Valve Amp - Safe Power For RTTY? - Printable Version

+- Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum)
+-- Forum: GENERAL (https://www.ahrdf.net/forum/forum-29.html)
+--- Forum: Transceivers, Transmitters & Receivers (https://www.ahrdf.net/forum/forum-18.html)
+--- Thread: Valve Amp - Safe Power For RTTY? (/thread-1368.html)



Valve Amp - Safe Power For RTTY? - VK4CCV - 14-12-2023

Hi to All,

As some may be aware, I have a ACOM-1500.

What would be a safe bet for maximum power to be used on modes like RTTY?

Regards

Pete


RE: Valve Amp - Safe Power For RTTY? - ZL3RC - 14-12-2023

Pete if you have a look at the manual page 29 has the answer to your question. 

Roger ZL3RC


RE: Valve Amp - Safe Power For RTTY? - VK4CCV - 14-12-2023

(14-12-2023, 06:20 PM)ZL3RC Wrote: Pete if you have a look at the manual page 29 has the answer to your question. 

Roger ZL3RC

Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV


RE: Valve Amp - Safe Power For RTTY? - ZL3RC - 15-12-2023

(14-12-2023, 06:54 PM)VK4CCV Wrote: You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV

Try this link..

https://www.acom-bg.com/sites/default/files/manuals/ACOM%201500%20User%20Manual%20GB%2008_2021.pdf
(14-12-2023, 06:54 PM)VK4CCV Wrote: Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV



(14-12-2023, 06:54 PM)VK4CCV Wrote: Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV


(14-12-2023, 06:54 PM)VK4CCV Wrote: Hey Roger,

You must have a special edition manual ?? 
My manual only goes to 21 then the schematic.

I will go to the ACOM site to see if there is an update.

Pete DU7/VK4CCV