Toroid Supplier/s - Printable Version +- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum) +-- Forum: GENERAL (https://www.ahrdf.net/forum/forum-29.html) +--- Forum: Ancillary, Test Equipment, Components & Parts (https://www.ahrdf.net/forum/forum-11.html) +--- Thread: Toroid Supplier/s (/thread-1406.html) |
Toroid Supplier/s - VK2CSW - 10-04-2024 Hi All, I am looking for suggestions on where to get FT-240-43 toroids. Other than Mini-Kits and Mouser, any suggestions? Cheers RE: Toroid Supplier/s - VK4ADC - 10-04-2024 Back about 15-20 years ago, I used to source my Amidon products from RJ & US Imports but they closed down a while ago. You should also search for the FAIR-RITE range as they make what is essentially an Amidon equivalent, and some are available through Element 14. https://au.element14.com/fair-rite/5943003801/ferrite-core-toroid-43/dp/1781257 Depending on final use, contemplate the "61" grade products as well, eg Amidon FT240-61 or equiv. Doug VK4ADC RE: Toroid Supplier/s - VK5TM - 11-04-2024 There's https://www.kitsandparts.com/ in the US if you can't get anything local. Make up a decent order of other stuff if possible to make the postage cost worthwhile. RE: Toroid Supplier/s - VK2CSW - 11-04-2024 I ended up buying from Mini-Kits. It turns out I had made the same order some years ago |