ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF )
PSE check 144.460 FT8 to find TEP path to JA - Printable Version

+- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum)
+-- Forum: BAND BY BAND (https://www.ahrdf.net/forum/forum-28.html)
+--- Forum: 144MHz & 432MHz (https://www.ahrdf.net/forum/forum-6.html)
+--- Thread: PSE check 144.460 FT8 to find TEP path to JA (/thread-1452.html)



PSE check 144.460 FT8 to find TEP path to JA - JR4ENY/1 - 03-09-2024

I saw my 1st the spread carrier on multiple VOR frequencies last night.
They were 112.8MHz and 114.1MHz.
112.8 from Weipa? and 114.1 from Townsville?
They were too weak to make a sound.

Recently I could hear FMBC from Mount Isa,Cairns and Townsville no problem.

Maybe 2m TEP path to Mount Isa also no problem like JA6-VK8.
And with Cairns and Townsville might be possible by weak signal mode.

PSE check 144.460 FT8 to find TEP path to JA.
2m activity is lower than before so pse check 144.460 FT8 where stations QRV surely.
(I have never seen Q65 at all)

The best time last night was around 10utc.
It starts about 40-60 minutes earlier than JA6-VK8 path.

FB DX!

de JR4ENY/1 Awa in Kawasaki PM95SN 50W 7x2el yagis v-pol