Rockby special : AMPHENOL 82-5721-1000 49.9ohm 1Watt N-Type RF Dummy Load - Printable Version +- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum) +-- Forum: GENERAL (https://www.ahrdf.net/forum/forum-29.html) +--- Forum: General Discussion (https://www.ahrdf.net/forum/forum-9.html) +--- Thread: Rockby special : AMPHENOL 82-5721-1000 49.9ohm 1Watt N-Type RF Dummy Load (/thread-773.html)

Rockby special : AMPHENOL 82-5721-1000 49.9ohm 1Watt N-Type RF Dummy Load - VK4ADC - 02-04-2019 From http://www.rockby.com.au/rockby/mailer/CLEA1419_1.cfm (Note these Rockby mailers usually only have short periods at the advertised prices..) 49.9ohm 1Watt N-Type RF Dummy Load  Device:82-5721-1000   Desc:49.9ohm RF Dummy Load   Type:N-Type Female   Manuf.: AMPHENOL 82-5721-1000 Stk No:29334  Min. Purchase Qty 1 * 1 up: $20.000 Can't find out much detail but http://www.farnell.com/datasheets/1931349.pdf shows the Amphenol N series parts are rated to 11GHz. Maybe this termination is too - or maybe it is only 1GHz or so. If you are looking for a low power N termination (at close enough to 50 ohms : 49.9 +/- 1%), $20 seems like a reasonable price.   Termination for a directional coupler up to microwave ?? Don't know how many they have available but be quick if you want one. Actually, 4 on hand at the moment pending orders in their system. P.S. : Found on a different web site : Connector, coax. RF Terminators female N jack - 50 Ohm (49.9 Ohm). Frequency: 11GHz. Amphenol P/N: 82-5721-1000. RE: Rockby special : AMPHENOL 82-5721-1000 49.9ohm 1Watt N-Type RF Dummy Load - VK4VU - 06-04-2019 Thanks Doug. In case anyone is looking for low power terminations with an N male interface then I note that Minikits has both Amphenol https://www.minikits.com.au/N-50R-1W?search=load&category_id=59 and Mini-Circuits products https://www.minikits.com.au/KARN50 available at pretty keen prices. I see that they also have SMA and BNC loads available. 73 Rod VK4VU