FRG-7 power switch - Printable Version +- ARCHIVE: Australian Ham Radio Discussion Forum ( AHRDF ) (https://www.ahrdf.net/forum) +-- Forum: GENERAL (https://www.ahrdf.net/forum/forum-29.html) +--- Forum: General Discussion (https://www.ahrdf.net/forum/forum-9.html) +--- Thread: FRG-7 power switch (/thread-810.html)

FRG-7 power switch - VK2EZT - 11-06-2019 Trying to find this for a FRG-7 repair.      Anyone have a clue where a supplier could be?  Need the red on the left.  Ezat RE: FRG-7 power switch - VK4ADC - 12-06-2019 Ezat I think you will find the same plastic mouldings were used on power switches on other Yaesu transceivers and linears from the same era, circa 1980s & 1990s. Don't limit your query / search to just the FRG7 model. Sorry, no I don't have one available. Doug RE: FRG-7 power switch - VK3RX - 12-06-2019 I gather that seller's store doesn't exist anymore? Someone locally was selling parts on ebay a while back, and I picked up two of the switches for the FRG-7000 I have. They are grey though, not red. You are welcome to one of them. Drop me a PM if interested. RE: FRG-7 power switch - VK5TM - 12-06-2019 NKK Switches. They are called Rocker Switches. RS have the switches (M2 series) and paddles seperately. https://au.rs-online.com/web/p/rocker-switches/1251909/ <- remove the plastic rocker part and replace with https://au.rs-online.com/web/p/rocker-switch-actuator-tools/4290112/ Switches are about $12 each, paddles about $1.80 each Not exactly identical, but not different enough that anybody is going to notice.