24-10-2017, 01:03 PM
Hi Wayne,
You did not say what program you were using. If it is WSJT-X and you can TX with JT65 then there should be nothing to change besides the mode.
You can use the Tune button to test that you can indeed go into TX. If that works then look at the "Tx even/1st" box
If it's unchecked you TX on the 15 & 45 second marks
If it's checked you TX on the 0 & 30 second marks
Of course, the Enable Tx button should be on (red).
You did not say what program you were using. If it is WSJT-X and you can TX with JT65 then there should be nothing to change besides the mode.
You can use the Tune button to test that you can indeed go into TX. If that works then look at the "Tx even/1st" box
If it's unchecked you TX on the 15 & 45 second marks
If it's checked you TX on the 0 & 30 second marks
Of course, the Enable Tx button should be on (red).