06-07-2018, 08:08 PM
Update:
Internal DC path between pin 9 & pin 11 is around one ohm. What I'm measuring is the supply voltage provided by L1 (after modification) coming back in through pin 11 & showing up on pin 9. Still no luck in enabling VCC_RF via u-center control.
Internal DC path between pin 9 & pin 11 is around one ohm. What I'm measuring is the supply voltage provided by L1 (after modification) coming back in through pin 11 & showing up on pin 9. Still no luck in enabling VCC_RF via u-center control.