Colin
I will look further into both of your comments...
The tick box placement is easy - it is just about a real estate agent's three dream words : location, location, location... Or finding enough space.... In reality, I wasn't going to make it optional initially. It was just going to be the newer format but I realised some users might actually prefer the original 'cleaner' presentation. Hence the tick box.
The retrieved data files contain a frequency string { eg frequency="10136466" } so it is easy enough to process that but where do we present that info ? An extra column after Mode ? Before Mode ? Joined into an existing column - which one ? (eg 30mFT8)
{{
Edit: for original listing style..
12Jul2018 03:37:34, V31DL, -8, 20m, FT8, EK57, Belize,
12Jul2018 03:36:32, VK3BDX, -10, 20m, FT8, QF21, Australia,
12Jul2018 03:35:30, AF9A, -24, 20m, FT8, EM69, United States,
12Jul2018 03:35:29, VK1AZ, -2, 20m, FT8, QF44, Australia,
12Jul2018 03:34:59, JA4LKB, -22, 20m, FT8, PM53, Japan,
12Jul2018 03:34:59, JH7QPW, -17, 20m, FT8, QM09, Japan,
12Jul2018 03:34:59, JA4QZX, -16, 20m, FT8, PM64, Japan,
Haven't revised the second view as yet..
Yes, I have: see attached image
}}
Do we just abbreviate it by band in Metres (eg 15, 17, 20, 30..) or frequency in MHz (eg 3.5, 7, 10, 14..) ? I note that PSK Reporter uses designators like 160m, 80m, 60m, 40m but since I have to do the conversion to band or MHz from the Hz frequency string anyway, I can present it almost any way you like.
I am open to implementing improvements in the software based on feedback received.
Anyone else have comments or suggestions before I start work on Colin's ?
Doug VK4ADC
I will look further into both of your comments...
The tick box placement is easy - it is just about a real estate agent's three dream words : location, location, location... Or finding enough space.... In reality, I wasn't going to make it optional initially. It was just going to be the newer format but I realised some users might actually prefer the original 'cleaner' presentation. Hence the tick box.
The retrieved data files contain a frequency string { eg frequency="10136466" } so it is easy enough to process that but where do we present that info ? An extra column after Mode ? Before Mode ? Joined into an existing column - which one ? (eg 30mFT8)
{{
Edit: for original listing style..
12Jul2018 03:37:34, V31DL, -8, 20m, FT8, EK57, Belize,
12Jul2018 03:36:32, VK3BDX, -10, 20m, FT8, QF21, Australia,
12Jul2018 03:35:30, AF9A, -24, 20m, FT8, EM69, United States,
12Jul2018 03:35:29, VK1AZ, -2, 20m, FT8, QF44, Australia,
12Jul2018 03:34:59, JA4LKB, -22, 20m, FT8, PM53, Japan,
12Jul2018 03:34:59, JH7QPW, -17, 20m, FT8, QM09, Japan,
12Jul2018 03:34:59, JA4QZX, -16, 20m, FT8, PM64, Japan,
Haven't revised the second view as yet..
Yes, I have: see attached image
}}
Do we just abbreviate it by band in Metres (eg 15, 17, 20, 30..) or frequency in MHz (eg 3.5, 7, 10, 14..) ? I note that PSK Reporter uses designators like 160m, 80m, 60m, 40m but since I have to do the conversion to band or MHz from the Hz frequency string anyway, I can present it almost any way you like.
I am open to implementing improvements in the software based on feedback received.
Anyone else have comments or suggestions before I start work on Colin's ?
Doug VK4ADC
Doug VK4ADC @ QG62LG51
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.