29-10-2019, 12:57 PM
I solved this problem with a knife switch, which is still working great. Thanks for all the suggestions though.
Yes, those are the ones I used originally. They are good and waterproof. You might have to built up the insulation thickness for them, but that shouldn't be a problem.
(05-03-2019, 01:51 PM)VK3RX Wrote: My open wire line is about 100mm apart and goes to a remote antenna coupler under the eaves of the house.
About 300mm away from the coupler I have automotive bullet connectors on each line for quick disconnect in case of storms. These are covered for water proofing, but I'm also looking for something better.
These have caught my eye:
https://www.jaycar.com.au/waterproof-sol...e/p/PP5102
https://www.jaycar.com.au/waterproof-sol...e/p/PS5100
Yes, those are the ones I used originally. They are good and waterproof. You might have to built up the insulation thickness for them, but that shouldn't be a problem.