01-12-2022, 07:16 PM
Hi
I always solder mine. The only ones that are a pain are the larger 50A ones with heavy cable as they require a lot of heat to solder.
It is possible to incorrectly connect Anderson connectors as per the picture.
If on end is a radio with the antenna cable connected and as a result connected other equipment that is also connected to same power source a short circuit will be present and it will revert to the circuit protection (fuse/breaker) present on the circuit to clear the fault.
73
Igor
VK6ZFG
I always solder mine. The only ones that are a pain are the larger 50A ones with heavy cable as they require a lot of heat to solder.
It is possible to incorrectly connect Anderson connectors as per the picture.
If on end is a radio with the antenna cable connected and as a result connected other equipment that is also connected to same power source a short circuit will be present and it will revert to the circuit protection (fuse/breaker) present on the circuit to clear the fault.
73
Igor
VK6ZFG