12-01-2023, 12:59 PM
On the release version of WSJT-X 2.6 the tick box for 'Call 1st' has been replaced by a pull down selection menu, which is by default set to be "none" if you want the old "Call 1st" behaviour you need to select either 'first' or 'max distance' then the software will respond when called.. I stumbled across this today while working vk1kw on 144 and wondered why the 'Auto Seq' had not kicked in and replied as I would have expected.
looks like I missed this change during all the beta releases as I had stopped using WSJT-X for FT8 on 50 MHz. Hope this avoids others getting that red faced feeling when the software does not work as expected
looks like I missed this change during all the beta releases as I had stopped using WSJT-X for FT8 on 50 MHz. Hope this avoids others getting that red faced feeling when the software does not work as expected
Peter Sumner, vk5pj
You have enemies? Good. That means you've stood up for something, sometime in your life.
- Winston Churchill
You have enemies? Good. That means you've stood up for something, sometime in your life.
- Winston Churchill