13-03-2017, 09:14 PM
Hi Simon, the load in the kits we sold were 50 watt units, I didnt do any damage to the 100 ohm load when I distroyed one of the
fets in the prototype unit. 2 of the 50 ohn resistors will fit the bill if you have nothing else on the combiner.
I have done quite a few units to date and all have worked well with only a couple of blown fets !!
good luck with the unit.
cheers Ralph
VK3WRE
fets in the prototype unit. 2 of the 50 ohn resistors will fit the bill if you have nothing else on the combiner.
I have done quite a few units to date and all have worked well with only a couple of blown fets !!
good luck with the unit.
cheers Ralph
VK3WRE