30-04-2017, 08:48 AM
VK-SWL002 Wrote:Ok. That video shows unlocking the radio from 40 channels to 80 channels. I did that quite awhile ago.
When I go onto a channel other than 1-8 and 41-48 I can see that they are set to duplex however when I try to toggle them I get "Er". On 1-8 and 41-48 when I try to toggle duplex I get "n1". "n1" is only offered as an option on 1-8 and 41-48. I am thinking that "n1" means duplex is on and "Er" means duplex cannot be selected. For the reason that "Er" only shows on the non-repeaters channels.
Maybe it is time to re-lock it back to 40 channels and see if you still have the duplex issue on channels 9 through 30. You haven't mentioned which channel number you have tried/been using when in convoy and maybe something in the order of 10 through 29 should be the desired value.
The Er will undoubtedly mean error so, yes, it is not a selectable option in the 80 channel state. Even more reason to revert.
The N1 would/should probably mean negative offset duplex is active for 1-8 etc.
73 Doug VK4ADC
Doug VK4ADC @ QG62LG51
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.