(05-08-2019, 11:46 AM)VK7HH Wrote: Hi All,
I want to get a slightly better antenna with more gain on 3.4 GHz than my GARC panel that I currently have.
As I'm relatively new, I wonder what others have done? I've seen coffee can feeds etc.. but I don't have a dish just yet (still looking for one).
Perhaps I can modify a gridpack antenna, shorten the dipole. Will the focal point change?
Any other antennas that can easily be converted to 3.4 GHz?
Hayden
Hi Hayden,
I'm in a similar situation so I decided to change out the feed of a 2.4GHZ grid pack for a WA5VJB LPDA. This gives me a dual band antenna for both 2.4 & 3.4 GHz.
The PCB LPDA's handle up to 60w before starting to cook. There's a doc on the net from W1GHZ who did that test
My grid pack is 20dBi on 2.4Ghz and should be similar on 3.4Ghz given the 3.4GHz feed point is not at focus.
I just need to add the coax and N connector and I'm done. I'll post test results when I've finished it.
(05-08-2019, 11:46 AM)VK7HH Wrote: Hi All,
I want to get a slightly better antenna with more gain on 3.4 GHz than my GARC panel that I currently have.
As I'm relatively new, I wonder what others have done? I've seen coffee can feeds etc.. but I don't have a dish just yet (still looking for one).
Perhaps I can modify a gridpack antenna, shorten the dipole. Will the focal point change?
Any other antennas that can easily be converted to 3.4 GHz?
Hayden
Hi Hayden.
I have purpose built 27dBi Gridpacks for 3.4GHz:
Freq Range: 3.3-3.8GHz
Bandwidth 500Mhz
Gain: 27dBi
Beamwidth: E9.5 H6.5
F/B Ratio: 30dB
VSWR: <1.5
Impedence: 50 Ohm
Polarization: Vertical or Horizontal
Max Power: 100W
Connector: N-Female
Dimensions:W 600xH900mm (Horizontal Polarity orientation)
Weight: 3.6Kg
Mast Diameter: 40-50mm
Manufactured: 2021
400x600mm version also available (cheaper)
18dBi 23cm/1296MHz Version Also available
Spare Feeders for each band also available (without rear grid reflector - Use your own reflector)
