I had forgotten...
#1
When I was first licenced, I was living on the northern outskirts of Sydney.

In those very early days I was blessed with S7 noise due to nearby 132kV power lines and railway overhead wiring.

As time went on the noise floor increased and increased until it was S9+ continuously. So I gave up on phone and moved to digital. Then along came the NBN and even digital was almost impossible.

A couple of years ago we moved to a semi-rural part of the Barossa Valley. Recently I have found the time and the will dig out some gear and start to muck around again.

After a couple of false starts I got FT-8 working with a bodgey install of a multi-tap helical mounted on the chook shed.

I was/am having some rf-in-the-shack so rejigged my earthing system and had a play this afternoon on 20m with FT-8. After getting a few in the log I decided to jump to USB and tune around. At first, I thought my S-meter was configured wrong, but no. Maybe AGC was off. Ahhh.  Still nothing was registering.  Suddenly, there we voices everywhere! The S-meter was bouncing around in the bottom half.

I had forgotten (or never knew) that radio background noise could be so quiet!  Wink Wink Big Grin
Reply
#2
You lucky bugger!
Things are almost impossible for me here now, on all bands from 160m up to 2m - sooooo much noise - increasing every day.

I have now given up on HF, but persevere on 6m and up.
Hilary, VK2AZ QF56IF31
Person to blame for VKSpotter
Reply


Forum Jump: