02-12-2017, 06:12 PM
The reason I ask is I could always hear it when I had my IC7000, weak but always there. Now I have an FT817 and I have yet to hear it. Perhaps the FT817 is a tad deaf.
Nev
Nev
VK3RGL, Mt Anakie 2m beacon ...still on air?
|
02-12-2017, 06:12 PM
The reason I ask is I could always hear it when I had my IC7000, weak but always there. Now I have an FT817 and I have yet to hear it. Perhaps the FT817 is a tad deaf.
Nev
03-12-2017, 05:56 AM
Hi Nev,
Yes still going. Listening to it right now. Can't give you a meaningful signal report as I am very close to it.
03-12-2017, 06:47 AM
Thanks Lou,
You have confirmed my worst fears. I have a 2m brick with a built in preamp that works well so I might hook it up and see what happens. Cheers Nev
03-12-2017, 07:19 AM
Hi Nev,
Make sure you are using the correct antenna socket (menu item 07) and remember that the front socket is not as good as the rear socket. I recall measuring around 3dB attenuation compared to the rear socket on a rig I had on the bench.
03-12-2017, 09:33 AM
I didn't know that, Lou. Must check it out.
Nev
03-12-2017, 11:22 AM
Hi Nev,
Yes, I learned that one from bitter experience on field day in the heat of battle. Why won't this ****** thing work!!!
09-12-2017, 04:17 PM
Hi Lou,
Nothing wrong with the ft817, just the operator. I didn't tune properly, I should have tuned down to hear the sig. Nev
10-12-2017, 07:32 AM
Hi Nev,
Good to hear you got it sorted. Thanks for the update. |
« Next Oldest | Next Newest »
|