Posts: 1,291
Threads: 326
Joined: Sep 2016
From text edition for SEP 23 2018 - VK NATIONAL NEWS BROADCAST ON VK1WIA : http://www.wia.org.au/members/broadcast/wianews/
Also in MP3 edition of news available at: http://www.wia-files.com/podcast/wianews-2018-09-23.mp3
"The ACMA released their five year spectrum outlook, and unfortunately, due to a high demand for spectrum, Australian amateurs will not have access to 60m in the near future.
Overall, no spectrum was added, and more importantly, no spectrum was lost.
This has been a great outcome for our bands with pressure from 5G and internet of things, so make sure you get out there and use it!"
Doug VK4ADC @ QG62LG51
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.
Posts: 1,291
Threads: 326
Joined: Sep 2016
Interestingly, RASA has taken up this matter and is requesting ACMA review its decision :
http://vkradioamateurs.org/acma-delays-5...-decision/
Doug VK4ADC @ QG62LG51
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.
Posts: 27
Threads: 2
Joined: Mar 2018
It doesn't come as a great surprise. There's always crossband operation - 60m to 40m for example.
Posts: 1,291
Threads: 326
Joined: Sep 2016
It doesn't stop you from getting a dipole (or other antenna) ready provided you only use an impedance bridge to tune it. Just no transmitters allowed - yet !!!
We already know what the centre frequency will be because of " the word-wide allocation of 5351.5 to 5366.5 kHz to the Amateur Service on a secondary basis " gives 5360KHz to tune to but the SWR bandwidth / tuning will be fairly broad so that an approximation is all that is required.
I plan to add a 60M section to my multiband 80 / 40 /30 dipole set as that will be fairly simple. I suspect I would run into tuning issues if I added it to my 160 / 80 / 40 /30 dipole set due to ' near' 1 and 1/2 wavelength actions from the full-size 160 metres section (CF=1830, 3x = 5490) - then again it may already give a reasonable SWR at 5360 but I can't try it. Maybe the 130KHz shift will be too far to be an issue in terms of tuning interaction.
Must have a listen across that band occasionally and see what I can hear internationally ....
Doug VK4ADC @ QG62LG51
http://www.vk4adc.com
This Forum is only going to be as interesting as the posts it contains.
If you have a comment or question, post it as it may trigger or answer the query in someone else's mind.
Posts: 291
Threads: 47
Joined: Sep 2016
It's interesting to compare the WIA NSW Sunday morning broadcasts on 5MHz vs. 80/40/30m.
Where To Hear Us
Posts: 157
Threads: 44
Joined: Sep 2016
(27-09-2018, 02:10 PM)VK4ADC Wrote: It doesn't stop you from getting a dipole (or other antenna) ready provided you only use an impedance bridge to tune it. Just no transmitters allowed - yet !!!
We already know what the centre frequency will be because of " the word-wide allocation of 5351.5 to 5366.5 kHz to the Amateur Service on a secondary basis " gives 5360KHz to tune to but the SWR bandwidth / tuning will be fairly broad so that an approximation is all that is required.
I plan to add a 60M section to my multiband 80 / 40 /30 dipole set as that will be fairly simple. I suspect I would run into tuning issues if I added it to my 160 / 80 / 40 /30 dipole set due to ' near' 1 and 1/2 wavelength actions from the full-size 160 metres section (CF=1830, 3x = 5490) - then again it may already give a reasonable SWR at 5360 but I can't try it. Maybe the 130KHz shift will be too far to be an issue in terms of tuning interaction.
Must have a listen across that band occasionally and see what I can hear internationally ....
5 MHz is widely used in PNG for health services communication because propagation is very good in that type of terrain and a jungle environment - something that was found out during WW2 when the Australians tried to use portable radios tuning 6-8 MHz with very poor results. The Japanese, who already had radio experience in a similar situation mainly stuck to 3-6 MHz.
If I listen around 5.5-5.8 MHz in the late afternoons I can easily hear some of the health nets I was using when I worked in PNG in the 1980's and 1990's. After sunset the band is swamped by Asians.
If we do get access to 60 Metres we will have to be very careful not to interfere with "safety of life" communications in our northern neighbors. Low-power data comms should be OK.
73
Wayne VK4WDM
Posts: 27
Threads: 2
Joined: Mar 2018
(27-09-2018, 02:10 PM)VK4ADC Wrote: Must have a listen across that band occasionally and see what I can hear internationally ....
There are some very strong signals on 60m from Hawaii at this QTH from time to time, and it's usually open to West Coast USA. They can use 100W PEP.
It will just take a few DX Pile-ups from overseas stations to convince other users in Australia to switch to their 10MHz allocations.
