08-07-2021, 02:40 PM
A new report on conducted emissions from household LED lamps reveals that there has been little improvement over the past decade, with one exception.
Measurements of conducted emissions were made across the frequency range from 150 kHz to 30 MHz using a standardised set up, which is detailed in the article.
The author, Ken Wyatt WA6TTY, is a senior EMC engineer heading his own technical consulting company, a senior member of the IEEE, and a long-time member of the EMC Society.
Check out the article here: Comparing conducted emissions from LED lamps
www.edn.com/comparing-conducted-emissions-from-led-lamps/
Measurements of conducted emissions were made across the frequency range from 150 kHz to 30 MHz using a standardised set up, which is detailed in the article.
The author, Ken Wyatt WA6TTY, is a senior EMC engineer heading his own technical consulting company, a senior member of the IEEE, and a long-time member of the EMC Society.
Check out the article here: Comparing conducted emissions from LED lamps
www.edn.com/comparing-conducted-emissions-from-led-lamps/