Posts: 157
Threads: 21
Joined: Sep 2016
Hi All,
My Trimble Thunderbolt monitor is displaying the incorrect date showing 15-Dec-97 today. No alarms evident. I've tried a power cycle but no change. Before I take this further has anyone else seen a similar thing?
Posts: 115
Threads: 41
Joined: Sep 2016
Yes. Adam Maurer. See his postings in the Facebook page VHF UHF Microwave - VK ZL Amateur ham radio.
Lou,
There is considerable discussion on various blog sites around the world about the problem, which ultimately lies with the fact that the first generation of GPS satellites only had a 10 bit week counter. The next generation of satellites have a 13 bit week counter which will (theoretically) allow for around 150 years!
As one blogger stated:" It's also worth noting that this issue doesn't affect the Thunderbolt's performance as a GPSDO, i.e. providing 1 PPS and 10 MHz signals locked to GPS. It only affects the year. The time and the rest of the date are still correct."
Cheers
Peter VK3QI
Posts: 157
Threads: 21
Joined: Sep 2016
Hi Peter,
I understand the effect is limited and has no bearing on the 10MHz signal. Adam was on to it pretty quickly and determined a fixed based on alternate information within the serial stream.